Change the masking messages in cITm - Change

Change the masking messages in cITm - Change in the behaviour of the masking messages. Create individual masking messages within the 8100 driver for every masking status, or ignore the not needed masking message from the offline masking status. eg. Module Offline 00 or Module Offline 01 and exclude 00 or include 01 to be ignored or to be added as a separate message within the driver. 3.exclude 00 or include 01 to be ignored or to be added as a separate message within the driver

The current issue:

The background is that the c8100 is sending upon startup the masking status, due to the complexity of the masking available on the c8100 various maskings are being sent.

BRF1 Instrument Masking 00 = Masking inactive
BRF1 Module Offline 00

If the Instrument masking at the 8100 is set upon Startup on the c8100, cITm receives the

BRF1 Instrument Masking 01 = Masking active

However the next message is being sent to MW and this is the

BRF1 Module Offline 00

This additional message within the current driver causes the masking to be set to 00, the reason is that all masking messages from the c8100 are considered to be the same.

8100 Driver version:3.8.1.42

cITm serial number: 200152